

Apple sells HomeView in two versions: one with a tilting stand for the table, and a flat one for the wall. Both cost $299 and have the same 7-inch screen. The catch with the wall version: the box holds only the device and its documentation. Mount, cable and power adapter you buy separately. Here is what each option needs.
The short answer
- The wall-mounted HomeView needs a Schneider Home Power Mount. There are three: USB-C, wired to mains, and Power over Ethernet.
- The USB-C Wall Connector ($59.95) is the easy one, but you also need a USB-C cable and a power adapter with at least 20 W (9 V / 2.22 A).
- The AC Wired mount ($79.95) connects to mains power behind the wall, with no cable in sight. That is a job for an electrician.
- The PoE Wired mount ($129.95) runs power and network over one Ethernet cable and comes in early 2027.
The three mounts compared
| Mount | Power from | Visible cable | US price | Available |
|---|---|---|---|---|
| Power Mount, USB-C Wall Connector | USB-C power adapter, 20 W or more | Usually yes, to the socket | $59.95 | now |
| Power Mount, AC Wired | Mains power in the wall | No | $79.95 | now |
| Power Mount, PoE Wired | Ethernet cable from a PoE switch | No | $129.95 | early 2027 |
Apple says the mounts can be installed yourself or by a professional. For the AC version, mains wiring is involved, so let an electrician do it.
Which power adapter works
For the USB-C mount, Apple asks for a USB-C adapter with at least 20 W that delivers 9 V at 2.22 A or more, plus a USB-C cable. Apple's own 40W Dynamic Power Adapter is listed as compatible. If the power isn't enough, HomeView shows a lightning bolt with a yellow warning triangle and the message "Power Adapter Not Supported".
For comparison: the table version comes with a 30 W adapter and a 1.5 m cable, and needs at least 30 W at 15 V / 2 A if you replace them.
If a wall-mounted HomeView doesn't start, Apple suggests testing it directly with a compatible cable and adapter. If it works that way, the problem is the mount or the installation.
Where to hang it
Apple pictures the wall version in the entrance or hallway. A few things to think about:
- Eye level. HomeView recognizes up to six people by their face and switches to their own home screen. That works best when you look at it straight on, not from below.
- Power. With the USB-C mount, a socket nearby keeps the cable short. A cable channel in the wall color hides it.
- Light. The screen goes down to 0.3 nits at night, so a hallway with no window is fine. In direct sun, 500 nits is the maximum.
- The camera. The 12-megapixel Center Stage camera is for FaceTime. Facing a wall or a mirror, it frames calls badly.
Hiding the cable
How much cable you see depends mostly on the mount:
- AC Wired and PoE Wired: power comes out of the wall, so there is no visible cable. AC Wired needs a mains line behind the mount (a job for an electrician), PoE Wired an Ethernet cable in the wall that leads to a PoE switch.
- USB-C Wall Connector: the USB-C cable runs from the mount to a socket. It is least noticeable when the socket sits directly below and the cable only drops a short way straight down.
- Cable channel: a flat surface-mounted cable channel, painted in the wall color, almost disappears. A short cable looks tidier than a long one that has to be coiled up.
- Conduit in the wall: if you are renovating anyway, run an empty conduit from the mount to the nearest socket and pull the USB-C cable through. The adapter stays at the socket, only the cable is in the wall.
If nothing should show at all, AC Wired is the answer for now and PoE Wired the one for early 2027.
Table or wall?
The table version has the better sound: two drivers in the display plus a woofer and two passive radiators in the base. The wall version has two drivers tuned for the wall. If HomeView is mainly your kitchen speaker and recipe screen, the table version is the simpler choice. As a home control panel by the front door, the wall version fits better.
The HomeView setup planner puts the mount, adapter and the rest of your smart home together. And for the screen itself, the HomeView wallpaper generator makes square wallpapers in exactly 1088 × 1088.
Frequently asked questions
Does the wall-mounted HomeView come with a power adapter?
No. Neither a power adapter, a cable nor a mount is included.
Can I use any USB-C charger for the HomeView wall mount?
It needs at least 20 W at 9 V / 2.22 A. Small 5 W or 12 W chargers are not enough.
How do I hide the cable of a wall-mounted HomeView?
Without any cable it works with the AC Wired mount (power from the wall, connected by an electrician) or, from early 2027, with PoE Wired. With the USB-C mount, a socket right below, a cable channel in the wall color or a conduit in the wall keeps it out of sight.
Do I need an electrician for the HomeView wall mount?
Only for the AC Wired version, because it connects to the mains in the wall. Apple says you can install the USB-C mount yourself.
When is the PoE mount for HomeView available?
Apple says early 2027, at $129.95.
Sources
- Apple Newsroom: Apple HomeView – a new way to enjoy entertainment and manage the home (13 October 2026)
- Apple Support: Power adapters for Apple HomeView
- Apple: Apple HomeView – Technical Specifications



